Skip to content
RigSherpa

For Toyota Land Cruiser 60, 80 and 100 Series

A trail mechanic in your glove box

RigSherpa is a small box that knows your exact truck: the model, your mods, your gear and your service history. Ask it from your phone how to fix something or get unstuck, and it answers with no cell signal.

The RigSherpa Sherpa with a pack and a big wrench

Your truck, not just the model

It knows your rig

After decades of owners, no two Land Cruisers are set up the same. Tell the box how yours is built and what's been done to it, and its answers start from there.

  • Your build

    Lift height, tire size, lockers, winch, dual battery, onboard air, a fridge or solar, and anything else you've bolted on. Answers start from your truck as it sits today.

  • Your gear

    Check off what you carry. Trail fixes that need a tool you don't have get left out, and the box shows which essentials you're missing.

  • Your service log

    Log each job with the date, mileage, parts and who did it, and keep notes on the problems your truck is known for. The box reads your recent work and those notes before it answers.

  • Your maintenance schedule

    The factory maintenance schedule for your truck is built in, and any interval we haven't checked against the factory manual is marked. Your service log keeps the date and mileage of every job you've done.

  • How you wrench

    Tell it whether you're new to this or have rebuilt a few, and whether you usually travel alone. That sets how much detail you get.

What your box keepsExample rig
Truck
1996 Land Cruiser 80 Series · 214,300 mi
Build
3 in. lift · 285/75R16 · Front and rear lockers · 9,500 lb winch · Dual battery
Carries
Hi-lift jack · Recovery boards · Tire plug kitDoesn't carry: Air compressor
Recent work
  • Mar 2026 · 209,800 mi · New radiator, was running hot on long climbs
  • Jul 2026 · 212,900 mi · Front axle seals and wheel bearings
Notes
Front birfield clicks at full lock. Watching it.
Owner
Comfortable with basic repairs · Usually travels solo

What it does

Answers when you're out of range

Knows one truck

Each box is built for a single Land Cruiser series. An 80 Series box answers about the 80 Series and turns down questions about anything else, so a spec for some other engine never reaches your wrench.

Works with no signal

Everything it knows lives on the box. It doesn't call out to the internet to answer, so it works at the bottom of a canyon the same as in your driveway.

Recovery and trail repair

Stuck to the axles, high-centered, a split radiator hose, a dead battery with nobody around. The Field Guide walks you through it step by step, starting with the 80 Series.

Specs it can back up

On the 80 Series, torque specs and capacities come from the factory service manual. On any truck, if we haven't checked a number against the manual, the box tells you it doesn't have it.

OBD2 where your truck has it

On trucks with an OBD2 port (1996–97 80 Series, every 100 Series) the box will read engine codes. That part is still being tested on a truck. The FJ60 has no port.

How it works

Your phone is the screen

  1. 1

    Put the box in the glove box

    It's built for one truck, so there's nothing to set up for the vehicle.

  2. 2

    Join its Wi-Fi from your phone

    The box runs its own Wi-Fi network. Your phone connects to it directly, with or without cell service.

  3. 3

    Ask in plain words

    Type the problem the way you'd say it to a buddy who knows the truck. The RigSherpa app only works with a box.

The RigSherpa Sherpa with a pack and a big wrench, one boot up on a pile of rocks

Not for sale yet

Get on the list

The 80 Series box ships first. Tell us your truck and we'll email you when yours is ready to order. Joining doesn't cost anything.

Questions

FAQ

Does it need cell service or Wi-Fi?

No. The box makes its own Wi-Fi network for your phone, and everything it answers from is stored on the box.

Which trucks does it work with?

Toyota Land Cruiser 60 Series (FJ60), 80 Series (FZJ80) and 100 Series. Each box is built for one of them. The 80 Series box ships first, and the 60 and 100 Series boxes are still in development. A 4Runner box for every generation is planned.

Can I use the app without the box?

No. The app is the screen for the box, and the knowledge lives on the box.

Where do the specs come from?

For the 80 Series, the factory service manual. For the 60 and 100 Series we're still checking specs against the factory manual, and until a number is checked the box won't give it to you.

Is it ready to buy?

Not yet. Put your email on the list with your truck, and we'll tell you when yours is ready to order. Joining the list doesn't cost anything or commit you to buying.

Is RigSherpa made by Toyota?

No. RigSherpa isn't affiliated with or endorsed by Toyota. We name the Land Cruiser only to say which trucks the box is built for.